B 8 Subject to change without prior notice 100 December 2021 Feature Nominal diameter DN10 – DN100 DN13,5 – DN114,3 DN1/2“ – DN4“ Operating pressure (-10 °C up to +140 °C) max. 40 bar: DN10 – 40, DN1/2“ – 1,5“, DN21,3 – 33,7 max. 25 bar: DN50 – 100, DN2“ – 4“, DN42,4 – 114,3 If elastomer gaskets are used. Flanges Specifications DIN 11853-1 (Welding end short) DIN 11864-1 (Welding end long) Material 1.4301, 1.4307, 1.4404, 1.4435 AISI 304, AISI 304L, AISI 316L Raw material Bar: DIN EN 10088-3, DIN EN 10272 Forging: DIN EN 10022-5 Surface finish Hygienic class (Surface raughness inside/outside) H1, HE1: no application H2, HE2: no application H3, HE3: Ra<0,8µm / Ra<1,0µm (DIN 11853-1, DIN 11864-1) H4, HE4: Ra<0,4µm / Ra<0,8µm (DIN 11864-1) H5, HE5: Ra<0,25µm / Ra<0,8µm (DIN 11864-1) (E = inner surface electropolished) Other surfaces available on request. Certificates Inspection certificate DIN EN 10204-3.1 raw material Inspection certificate DIN EN 10204-3.1/AD2000-W2 raw material with certificate for transfer of identification Test report DIN EN 10204-2.2 e.g. surface roughness, material, ferrit portion Declaration of compliance with the order DIN EN 10204-2.1 Other certificates on request Nuts Specifications DIN 11851 Material 1.4301, 1.4307, 1.4404 AISI 304, AISI 304L, AISI 316L Surface finish Blank Certificates Certificate TÜV Type-test
RkJQdWJsaXNoZXIy MTcwNzE3Mg==